Posted on

How To Machine Polish Your Car

This is a full step by step guide on how to machine polish your own car like a pro.

Introduction to machine polishing:

Polishing using a machine opens up more possibilities with regards to polishing by hand, simply because products can be worked much harder and for much longer with ease. For instance, many well-liked dual action machine polishers possess a maximum operating speed of around 6000 orbits for each minute. It is impossible for an individual to copy the project rate; imagine aiming to polish a panel in a circle action 6000 times a minute for five minutes or higher, all the time putting on continuous pressure.

Simply because the work rate is furthermore selectable, machine polishers can be used to securely sort out most styles of paint issues, including moderate swirl marks to fairly deeply scratching. The sole proviso is that the clear coat should be intact before starting, and must not be lowered to fewer than 76% of your original thickness thanks to polishing. A further benefit of polishing simply be using a machine with large work rates is the fact that painted surfaces might be burnished a great exceptionally excessive lustre before the making use of sealant and also wax protection; the very same high-quality of finish is extremely harder to accomplish while working personally.

Even though machine polishing provides several benefits above doing the job personally, in addition, it offers complexity to your polishing process. The reason being, even more, alternatives have to be created with consideration to machine kind in addition to pad selection. These particular options are crucial, in the event that you get them mistaken it is rather all too easy to harm ones paint; machine polishers will be able to take out paint incredibly speedily if they are not utilized properly. Let’s begin with the number of machine types.

Machine polishers fall into 1 of 2 camps; rotary or dual motion. Rotary machine polishers will be the range of expert valeters. As the name indicates, the particular polishing head swivels consistently about a hard and fast stage with speeds of up to 2501 cycles every minute. This turning action produces a lot of rubbing which you can use to great advantage when fixing serious paint problems. Having said that, the negative effects with this is it is usually super easy to create harm in the form of burn spots. Learning the skill of circular polishing takes a large amount of training.

Types of machine polishers:

Dual action machine polishers work very differently to rotary polishers, in that the actual polishing head oscillates at random about a fixed point as being the polishing head spins (which means the phrase dual action). This simply means that friction is without a doubt enormously decreased during any kind of reason for contact, decreasing the efficient work rate and also tremendously minimizing the likelihood of burning the paint or removing too much of the clearcoat. Because of this, dual action machine polishers are ideal for lovers who want to be capable of securely correcting their paint without having the anxiety about imposing more damage.

A typical fantasy is that often dual action polishers are considerably less effective than rotary machine polishers. While it’s true that very critical paint defects can often basically be entirely remedied simply be using a rotary polishing, it is usually true that dual action polishing can usually correct all but just about the most critical of problems on most paint kinds. The main significant difference it is time taken to perform the correction; a job which could take under 1 hour with a rotary polishing machine might take many hours or maybe more using a dual action polisher due to the decreased effective work rate, but also in most situations, the result is going to be similar.

Pad selection:

Pad selection is yet another essential decision whenever polishing by machine. Just about all pads designed for use with dual action machines polishers are made from various levels of high-quality flexible polyurethane foam. The tone of one’s foam determines its appropriateness for different polishing machine tasks (polishing, compounding, glazing) and it is typically colour coded to make acknowledgement a lot easier, while providers hardly ever operate using the similar colour schemes, thus generally study product descriptions thoroughly.

Compounding pads are made from typically the firmest foams and so are commonly non-reticulated, because of this the foam has not been thermally widened throughout manufacture and for that reason continues to be pretty firm along with heavy. This allows such pads to chop into the top of the paint very easily, and so they need to, therefore, be taken properly.

Polishing pads are produced from foams of more advanced firmness and they are commonly reticulated, indicating these are a lot more flexible and flexible compared to compounding pads. This sort of pads employs a minor chopping motion that permits these to correct modest blemishes without taking away excessive paint. Glazing pads are made of less harsh foams and are also continually fully reticulated. Such pads haven’t any cutting motion but they are capable of burnishing paint for a remarkably higher lustre. Possibly more supple foams at the moment are designed for using liquid sealants and even waxes too.

As well as the suppleness with the foam, pad patterns in addition change in proportions and even shape, covering anything from small, flat pads to large, variably contoured pads. Little spot pads varying from 80 mm to 100 mm in size are designed to be used with 75-90 mm assistance plates, and function 2 key purposes. To begin with, they allow usage of difficult spots, which include all-around grills and even wing mirrors.

Next, they permit precise issues, like scratches, to be working more difficult, as their size will mean that every one of the machine polisher efforts is focused on a lesser place. As an extra advantage, their particular size will also mean which much less surrounding paint is usually affected by the process of scratch elimination. Bigger pads typically varying in dimensions from 135 mm to 165 mm can be used with 125 mm backing plates, and are suitable for basic polishing machine tasks and working upon bigger panels.

Up to now, pads were constantly flat, though new developments in technology and design have lead to the production of shaped pads on to the market, which might be at times much better to manage. Probably the most leading-edge pads on the market today feature adaptable contour and also continuous pressure systems, that provide increased versatility such as many polishing machines faces an extra safety in the form of foam tiers that really help to remain the polisher level on use.

Now that we now have examined each of the choices encircling machine polishing, we should be capable to identify safe and sound approaches to defect correction. In all cases, one thing you should do is keep your paint is actually spotlessly clean and dry; wash your motor vehicle 1st and then decontaminate it in the event exterior contaminants is evident.

So that you can correct major paint disorders, which include critical swirl marks as well as acid imprinted, we recommend that first, you use a good polishing machine pad together with the moderate aggressive polish (the precise alternative really should be created using due factor shown to the actual hardness from the paint getting. This mixture may be worked hard at high speed without any being nervous about extracting a lot of the clearcoat.

If following a lot of applications the particular problems still carry on, you may want to look at exchanging over to a good cutting pad and also a heavier polishing compound. Nonetheless, this kind of action should not be taken gently and preferably as long as you might be expert with machine polishing and have searched tips through a knowledgeable person first. If you want to proceed, at all times function in a well-lighted area, check your progress after each individual try out, whilst keeping the running speed beneath 5000 orbits per minute.

Polish, glaze and waxes:

When you have taken off the particular issues, check the quality of the finish. If you see any marring you simply must execute another polishing machine step, on this occasion using a polishing pad in conjunction with a finishing polish. It is recommended that the same mixture is used for you to sort out less serious paint imperfections, for instance, mild swirl marks plus fine scratches.

In the event that after a lot of applications the disorders still remain, you can then try a moderate rough polish (applied using a fresh polishing pad; you must not combine products on the same pad). Always use the least aggressive item you are able to to get the job done, and always suit your selection of pad for the task at your fingertips.

The method will become much more straightforward should your aim is to simply mask any leftover disorders or maybe burnish the finale when preparing regarding sealant and also wax protection; simply use some sort of glazing pad to utilize a suitable range of glaze.

Step by step on how to machine polish your car:

Relating to the particular polishing machine procedure, the process is comparable whether operating large areas or even precise blemishes. In the matter of the previous, one thing you should do is mask off almost all trims using low tack masking tape. The reason being it really is tricky to steer clear of running on to trims when using large pads, as well as malfunction to coat them usually ends in tinting that is therefore difficult to eliminate.

The second process is always to choose an ideal pad and even merchandise mix with the task at hand. Then you should fit the assistance plate to your polisher, press the pad in position (making sure you actually centre it around the backing plate) and connect the electricity supply. We recommend using an RCD protection device and an extension cable so that you can let almost all panels to be quickly and safely reached. Congratulations, you will be ready to commence machine polishing.

Before you can do, you must prime the pad; what this means is adding a little lubrication on the pad, in order that dry buffing is actually eliminated ahead of the polish provides time for it to spread. The easiest way to actually prime your pad should be to mist it as soon as having a quick detailer. The next matter to complete is actually applying three or four drops of the product into the pad; that is greater than sufficient normally.

With the pad prepared and loaded with polish, the next thing you should do prior to turning your machine on is to distribute the product through the work area simply by pushing it regularly against the panel; this kind of subsequently means that all parts of your workspace are usually consistently polished. Try to do the job 2 ft x 2 ft parts at one time, starting on a panel clearly showcasing defects you wish to correct (this enables you to immediately determine whether your choice of pad, as well as product, is going to attain the preferred outcome). From the pad held resistant to the paint, you can now turn the device on. Our recommendation is that you see the instructions furnished with the equipment before you 1st use it, paying specific focus to the area on secure working routines. Once you begin polishing, it is best to make a short pass over the main workspace during a reduced tempo setting (2-3 on your dial of many dual motion machine polishers) as a way to encourage the product to work on evenly along the pad and also the panel.

Only a few pea-size spots of a medium rough polish are crucial for every 2 ft x 2 ft spot.
The polish really should be dabbed towards the panel and next spread at low speed.

After completing the following initial move during a coverage rate of 4 to 6 inches per second, you’ll want to turn the pace upwards (4-5 around the dial of all dual motion polishers) and after that shift thoroughly over the panel, applying light to moderate downhill pressure. Slow, overlapping passes by are fantastic; there isn’t a need to move the machine rapidly backwards and forwards or sideways.

Various products will need numerous numbers of work prior to being ready to be removed, and also understanding when this may be the case simply comes equipped with technique (although a good general guideline is the fact most allow you to go over a two ft x 2 ft work area at least three dozen times prior to being all set to be buffed off). A very good sign is usually a change in the visibility of your polish deposits; several may actually turn out to be transparent when they have been thoroughly worked and broken down.

It is best to stop the machine with the pad placed up against the paint. Many product residues certainly are a small bit firm, as well as their elimination typically wants firm however mindful buffing by having a microfibre towel. Plush towels with a short nap are good for this since they’re kind for the surface, however, have an adequate bit to raise polish remains with no trouble. As soon as the deposits are taken off you need to check out the panel as well as repeat the process if flaws still remain a problem.

The particular polish ought to be worked well systematically in an overlapping pattern at high speed.
After a few dozen passes polish will start to turn transparent on the grounds that the abrasives break down.
Complete removal of your scratches, allowing a perfect highly polished finish.

Whenever polishing out particular faults, such as serious scratches, the strategy is essentially the exact same, nevertheless, the range of pad will certainly differ.
Polishing pads should be prepared just before use with a quick mist with quick detailer
A little more polish than usual is needed whenever focusing on deep localized disorders.
All of the polish must be dabbed on and next, to begin with distributing at low speed.
After spread, all of the polish really should be worked well at fast speed using moderate pressure.
Immediately after a couple of attempts, a good layer of glaze along with a top coat of sealer and the scratch should go away.

The final part of the process: (cleaning and tidying equipment)

The last part of this polishing process is always to pack away all the equipment you have applied, being sure everything is neat and prepared for next use. All cloths and even applicator pads need to be cleaned inside a washer at a low temperature by using a non-biological liquid soap (stay away from cleaning soap powders as well as detergents that contains bleach or fabric softeners) before being in a position to dry out naturally.

Virtually all machine polishing pads really should be scraped off getting a dull plastic edge and then rinsed out completely underneath the tap before being left to soak for 10 To 15 minutes in a bucket of pad washing solution. Just after 10 To 15 minutes is up, all of the pads ought to be rinsed out carefully and then kept to dry out normally.

Bobby’s best buys hope you had a great read. Thanks, and we hope to see you back for more tutorials on how to clean your car.